User Tools

Site Tools


shop_departments:3d_lab:flashforge_creator_pro_-_ffcp-001

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
shop_departments:3d_lab:flashforge_creator_pro_-_ffcp-001 [2021/03/22 21:24]
2djoe
shop_departments:3d_lab:flashforge_creator_pro_-_ffcp-001 [2021/11/20 18:36] (current)
2djoe [Flashforge Creator Pro]
Line 6: Line 6:
 | Type | FDM/FFF |  | Type | FDM/FFF | 
 | Filament Diameter | 1.75mm | | Filament Diameter | 1.75mm |
-| Hotend Type | PTFE-lined |+| Hotend Type | AllMetal |
 | Nozzle Diameter | 0.4mm | | Nozzle Diameter | 0.4mm |
 | Nozzle Material | Brass | | Nozzle Material | Brass |
 | Left Nozzle | **OPERATIONAL** | | Left Nozzle | **OPERATIONAL** |
-| Right Nozzle | **BROKEN** |+| Right Nozzle | **OPERATIONAL** |
 | Heated Bed | Yes | | Heated Bed | Yes |
 | Build Volume (X, Y, Z) | 148mm × 227mm × 150mm | | Build Volume (X, Y, Z) | 148mm × 227mm × 150mm |
-| Status | **OUT OF ORDER** |+| Status | **OPERATIONAL** |
  
 ===== Documentation ===== ===== Documentation =====
 * [[https://www.flashforge.com.hk/uploads/5/8/1/9/58196085/flashforge_creator_pro_user_manual_en_version04.29.2015.3.2._latest.pdf|Manual]] * [[https://www.flashforge.com.hk/uploads/5/8/1/9/58196085/flashforge_creator_pro_user_manual_en_version04.29.2015.3.2._latest.pdf|Manual]]
shop_departments/3d_lab/flashforge_creator_pro_-_ffcp-001.1616448292.txt.gz · Last modified: 2021/03/22 21:24 by 2djoe