shop_departments:3d_lab:flashforge_creator_pro_-_ffcp-001
This is an old revision of the document!
Flashforge Creator Pro
| Type | FDM/FFF |
| Filament Diameter | 1.75mm |
| Hotend Type | PTFE-lined |
| Nozzle Diameter | 0.4mm |
| Nozzle Material | Brass |
| Left Nozzle | OPERATIONAL |
| Right Nozzle | BROKEN |
| Heated Bed | Yes |
| Status | OPERATIONAL |
Documentation
* Manual
shop_departments/3d_lab/flashforge_creator_pro_-_ffcp-001.1606936280.txt.gz · Last modified: 2020/12/02 19:11 by 2djoe
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
