User Tools

Site Tools


documentation:cnc_routers:shapeoko2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
documentation:cnc_routers:shapeoko2 [2020/02/13 23:38]
shchang [FAQ]
documentation:cnc_routers:shapeoko2 [2020/06/30 21:07] (current)
shchang [Training]
Line 5: Line 5:
 =====Training===== =====Training=====
  
-You must be signed off to use the Shapeoko 2. There are 2 ways to get signed off: +Training is required ​to use the Shapeoko 2. 
-  - **Class option:** Take a Shapeoko 2 introductory class (occasionally offered through Eventbrite)+To get trained, watch the CNC Orientation video (coming soon) and complete ​the online quiz with score of 100%.
-  - **Self-guided option:** Read this wiki page. Schedule a time with the CNC manager to get checked off. You should be able to +
-  * Turn on and off the machine +
-  * Home the machine +
-  * Jog the machine +
-  * Use workholding method ​of your choice +
-  * Change router bits +
-  * Set the zero position +
-  * Start a run+
  
-If you need time in front of the machine ​to get used to the controlsyou can run the machine without turning on the spindle. To test if your code works, you can "​cut ​air" ​(run the program without any stock). But to turn on the spindle and actually cut material, you should be checked off first.+Quiz access: 
 +[[https://​docs.google.com/​forms/​d/​e/​1FAIpQLSfR0HdtYpXEUh8SXmR8meotSRbrZQjoJZXIQawnS5LSEM3Yjg/​viewform?​usp=sf_link]] 
 + 
 +If you are new to CNC routersperforming an "air cut" ​with the spindle off prior to cutting solid material ​is recommended.
 =====Safety===== =====Safety=====
 ---- ----
Line 30: Line 25:
 {{:​shapeoko_overview.png?​600|}} {{:​shapeoko_overview.png?​600|}}
  
-The following instructions assume you are using [[http://​easel.inventables.com|Easel]] for CAD and CAM, and for sending GCode to the controller. You can use other CAM programs, but Easel is the easiest for getting started because it walks you step-by-step through the sequence of operations for setting up and executing a cut.+You can use [[http://​easel.inventables.com|Easel]] for CADCAM, machine control, and sending GCode to the controller.
  
 +You can also use Universal GCode Sender Platform (installed) for machine control and sending GCode while using other CAD/CAM software such as Vetric VCarve Pro for design.
 =====Creating an Inventables account===== =====Creating an Inventables account=====
 ---- ----
  
 Go to [[http://​easel.inventables.com|http://​easel.inventables.com]] and follow the instructions to setup an account. Go to [[http://​easel.inventables.com|http://​easel.inventables.com]] and follow the instructions to setup an account.
 +You only need an Inventables account if you plan to use Easel.
 =====Operating the Shapeoko===== =====Operating the Shapeoko=====
 ---- ----
Line 56: Line 52:
 ---- ----
 The Arduino controller is powered by the computer via USB. The Arduino controller is powered by the computer via USB.
-The computer, monitor, and motor drives are powered by the distribution board as shown. The master, computer, and monitor switches may be left on all the time. The drives switch should be turned on when you want to start the drives and turned off when you are finished. +The motor drives are powered by the motor-drive power supply ​as shown. The drives switch should be turned on when you want to start the drives and turned off when you are finished ​with the machine.
- +
-{{:​power_distribution.jpg?​600|}}+
  
 +{{:​documentation:​cnc_routers:​shapeoko_ps.jpg?​600|}}
 ====Workholding==== ====Workholding====
 ---- ----
Line 73: Line 68:
 Illustrated here is a method of clamping your workpiece using setup clamps. Always ensure that your workholding tools are not in the way of the toolpath. Illustrated here is a method of clamping your workpiece using setup clamps. Always ensure that your workholding tools are not in the way of the toolpath.
  
-{{::workholding_example.jpg?600|}}+{{:documentation:cnc_routers:​workholding_setupclamp.jpg?600|}}
  
-{{::​setup_clamp.jpg?​600|}} +In photo: 1/4" threaded rod, 1/​4" ​thumb nut, and slotted bar
- +
-In photo: 1/4" threaded rod, 1/​4" ​flange ​nut, step block, and slotted bar+
  
 ====Setting Z-axis zero==== ====Setting Z-axis zero====
Line 156: Line 149:
   * Static discharge causes a hard-limit switch to trigger.   * Static discharge causes a hard-limit switch to trigger.
  
-The hard-limit switches have been disabled for this reason. +The hard-limit switches have been disabled for this reason. ​(6/20/2020 -- this has been fixed)
- +
-  * The slotted bar clamp is not sized for a 1/4" threaded rod.+
  
-A temporary fix has been made with a flanged 1/4" nut. 
  
   * The X- or Y- axes seize up from too much dust packed in the V wheels.   * The X- or Y- axes seize up from too much dust packed in the V wheels.
documentation/cnc_routers/shapeoko2.1581637101.txt.gz · Last modified: 2020/02/13 23:38 by shchang