User Tools

Site Tools


documentation:cnc_routers:shapeoko2

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
documentation:cnc_routers:shapeoko2 [2020/06/21 04:10]
shchang [Workholding]
documentation:cnc_routers:shapeoko2 [2020/06/30 21:07]
shchang [Training]
Line 6: Line 6:
  
 Training is required to use the Shapeoko 2. Training is required to use the Shapeoko 2.
-To get trained, watch the CNC Orientation video (coming soon) and complete the online quiz (coming soon) with a score of 100%.+To get trained, watch the CNC Orientation video (coming soon) and complete the online quiz with a score of 100%. 
 + 
 +Quiz access: 
 +[[https://docs.google.com/forms/d/e/1FAIpQLSfR0HdtYpXEUh8SXmR8meotSRbrZQjoJZXIQawnS5LSEM3Yjg/viewform?usp=sf_link]]
  
 If you are new to CNC routers, performing an "air cut" with the spindle off prior to cutting solid material is recommended. If you are new to CNC routers, performing an "air cut" with the spindle off prior to cutting solid material is recommended.
Line 146: Line 149:
   * Static discharge causes a hard-limit switch to trigger.   * Static discharge causes a hard-limit switch to trigger.
  
-The hard-limit switches have been disabled for this reason. +The hard-limit switches have been disabled for this reason. (6/20/2020 -- this has been fixed)
- +
-  * The slotted bar clamp is not sized for a 1/4" threaded rod.+
  
-A temporary fix has been made with a flanged 1/4" nut. 
  
   * The X- or Y- axes seize up from too much dust packed in the V wheels.   * The X- or Y- axes seize up from too much dust packed in the V wheels.
documentation/cnc_routers/shapeoko2.txt · Last modified: 2020/06/30 21:07 by shchang