documentation:access_control_system
The Access Control System (Formerly used for only door control) door controller consists of Raspberry Pi 4B+ running Raspbian and configured with https://github.com/tcmaker/access_control/blob/master/doc/installation-instructions.md
Open Access Control v 4.0 http://www.accxproducts.com/wiki/index.php?title=Open_Access_4.0
The access control systems are located in the Lathe Room behind a panel.
Source code for the door controller and documentation can be found here on our GitHub page https://github.com/tcmaker/access_control
12 Volt relay in the basement
125Khz Keys provided to members listed in Common Consumables
documentation/access_control_system.txt · Last modified: 2022/05/10 19:31 by facilitator
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
